TM1/M1-R Tremolo Module for Vintage Ampegs, OUT OF STOCK

TM1 M1R

OUT OF STOCK, RETURN DATE UKNOW

 

Newest version of the TM! and M1R tremelo replacment module.

Comes on small PCB for universal mounting.

Use for the following amp series:

  • GS12R Reverberocket II
  • GEMINI I, II, VI, G20, G15, GS15, GS15R
  • Not for earlier Reverberocket or Jets (no module used on these)

The TM1 will also replace the CL1110M  module in the  GU12 and AC12 amps.

Not sure, Contact us for help.

 

NOTE;  Ampeg used basically the same units from 1963-1980. You will see these as a box or a tube, 4, 5 or 6 wire  versions, PC board mount or hardwired. These new replacement units have been made to  allow for use in all circumstance..
Depending on the amp and how this unit i s  mounted the new TM1 may exhibit a ticking noise.
Adjusting the location and/or adding electrical shielding may help.
 
You may also experience variation in the speed and  depth of the tremelo.
Trying different values of resistors in the circuit may also help with this.
 
For best results it is also recommended replacing the caps in and around  the Vibrato circuit using our rebuild kit offered below:
  • 1pc. 25/25 Electrolytic Capacitor
  • 3pc. .05 (.047/630v) Capacitors
 

 

NOTE; Depending on the amp and how this unit i s  mounted the new TM1 may exhibit a ticking noise.
Adjusting the location and/or adding electrical shelding may haelp.
 
You may also experiece variation in the speed and  depth of the tremelo.
Trrying diffferent values of resistors in the circuit can also help with this.

 

 
Starting Price for Module Only.

OUT OF STOCK

$ 40.00

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.