TM1/M1-R Tremolo Module for Vintage Ampegs, UPDATED
Newest version of the TM! and M1R tremelo replacment module.
Comes on small PCB for universal mounting.
Use for the following amp series:
The TM1 will also replace the CL1110M module in the GU12 and AC12 amps.
Not sure, Contact us for help.
NOTE; Ampeg used basically the same units from 1963-1980. You will see these as a box or a tube, 4, 5 or 6 wire versions, PC board mount or hardwired. These new replacement units have been made to allow for use in all circumstance..
Depending on the amp and how this unit i s mounted the new TM1 may exhibit a ticking noise.
Adjusting the location and/or adding electrical shielding may help.
You may also experience variation in the speed and depth of the tremelo.
Trying different values of resistors in the circuit may also help with this.
For best results it is also recommended replacing the caps in and around the Vibrato circuit using our rebuild kit offered below:
NOTE; Depending on the amp and how this unit i s mounted the new TM1 may exhibit a ticking noise.
Adjusting the location and/or adding electrical shelding may haelp.
You may also experiece variation in the speed and depth of the tremelo.
Trrying diffferent values of resistors in the circuit can also help with this.
Starting Price for Module Only.
|Items In Cart :||0|