70x40f@600+40f@450v v Multicap, New! Upgrede for 70x40x40@500v

70x40@600v+70@450v

70ufx40uf@600v+40uf@450vMulticap.

We've added this updated cap with higher voltages specifically for use in the vintage Ampeg combo amps: Gemini G12, Gemini II GS15R. Gemini VI,  Reveberocket II GS12R and others.

Built to operate in high temperature applications like tube amps.

With modern wall voltages being higher, the DC voltage on these vintage amps  will also go up. This can cause problems because the power supply can spike when you first turn the amps on out of standby. These spikes can be 50+v or higher.  Our new caps will handle these spikes and the higher wall voltage providing an more stable power supply.

 Usage:

Use the 70uf + 40uf@600v sections for your plate and grid voltages as they are the highest in the amp.

These are usually marked points A and B on your schematic. Voltages are 450v or higher.

The remaining 40uf@450v section can be used for the lower voltage leg that feeds the preamp stages where the voltages usually 350vdc or lower.

 DO NOT USE FOR v SERIES AMP, THESE NEED TO BE INUSLATED, USE OR 70X40X40@450V FOR THAT APPLICATION

 

$ 42.00

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.