Ampeg B15N/B12N Complete Power Supply Rebuild Kit

Save $15.35. Power supply rebuild kit for Ampeg  B15N, NF, B12N (1962-1980) amps with fixed bias. Does your vintage B15 have a blown or non stock power transformer? This kit will bring it back to stock.

Kit Includes:

  • 1pc. PT108 120v USA or 240v (add 12.50) power transformer
  • capacitor kit for b15 (1pc 40x3/525v, 1pc 30/600v, cap mount ring, cap mount bolts,bias supply cap chosen from the menu below) See note below on other multicap options.
  • 1pc. JJ 5AR4, 5U4GB or Solid State rectifier
  • 1k/10w power resistor.

For 230v operation select 115v/230v from the menu below. All transformers made in USA.

Rectifier Choice:

5AR4: Used on most amp models including B15N/B12N and B15NF, fixed bias (100/100 bias cap)

5u4GB: Used on models B15N/B12N cathode biased early models, (50/50 bias cap) thermistor sold separately.

Solid State: Used on models B15NB cathode bias with thermistor. If you choose this kit it wil include 4 diodes and the thermistor. (50/50 bias cap)

 

MAIN FILTER CAPACITOR  NOTE:

Some early models (1960-1963)B15NA, B15NB, B15NC, used 40x40x20x20@500v or, 40ux4/500v caps. There are somevery early models with caps under the chassis using  a dual 40uf/500v and dual 20uf/450v cap setup.

PLEASE CHECK YOUR AMP BEFORE ORDERING AND LET US KNOW IF YOU NEED US TO SUB IN ONE OF THESE MULTICAP SETUPS.

NOTE: Starting price is for kit with solid state rectifier. Kits with tube retifiers will add additional cost.

$ 345.00

Bias Cap :
Operating Voltage :
Rectifier Type :
Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.