Cap Kit for Ampeg Gemini II, G15 V.2 , G-15V, VI GS-15R

Cap kit for some later version Gemini II, V, and VI amps. Cap Kit contains:


  • 1 pc.80x40x30x20/525v (Replaces 80x40x40/500v and 70x40x40/500v)
  • 1pc. 33x33/450v  (replaces 20x20/450v)
  • 1pc 100/100
  • 1pc cap mounting ring and bolts.
We use the 80x40x30x20 /525v here because of the higher voltage used on the power tubes of the Gemini II.


Note: the caps supplied here may not match up exactly to the values shown on your schematic or in your amp. The values we've chosen here are based on the closest approximation to what Ampeg was looking for in it's amps and we are confident these will not only maintain your tone and performance but improve it as well. If you are not confident in your electronic abilities, for safety we recommend you have a qualified tech to install  the kit.

$ 69.00

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.