Cap Kit for Ampeg V4/VT22/V2/VT40 w/Distortion Control

Electrolytic capacitor kit for your v series amps with distortion control.

Cap Kit Contains:

  •  2pc. 100x40/450v
  • 3pc. Cap mount rings
  • 1pc 40x40x40/600v cap (upgrade)
  • 1pc 47/500v
  • 2pc. 10/160v
  • 1pc 30/600
  • 6 cap mounting bolt w/nut
  • 2pc 100k/2w resistor. .

The caps supplied here may not match up exactly to the values shown on your schematic or in your amp. The values we've chosen here are based on the closest approximation to what Ampeg was looking for in its amps and we are confident these will not only maintain your tone and performance but improve it as well. If you  are not confident in your electronic abilities, for safety we recommend you have a qualified tech install the kit.

$ 138.00

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.