EMINENCE NEO DELTALITE II 2510 10" 8 OHM SPEAKER NEW!

Eminence Deltalite II 2510

LIGHTEN YOUR LOAD WITH THE NEW EMINENCE DELTALITE 10" SPEAKER. USES A NEODYMIUM MAGNET TO CUT DOWN THE WEIGHT WHILE STILL GIVING YOU THE SAME GREAT TONE AS THE STANDARD DELTA 10. TRY IT IN ANY 410 BASS CAB AND GIVE YOUR BACK A BREAK! WEIGHS ONLY 5LBS. RATED AT 250W.

SPECIFICATION   
Nominal Basket Diameter  10", 254mm
Nominal Impedance*  8 ohms
Power Rating   
Watts 250W
Music Program  500W
Resonance 53Hz
Usable Frequency Range  60Hz-4kHz
Sensitivity*** 97.3
Magnet Weight  7 oz.
Gap Height  0.275", 7mm
Voice Coil Diameter 2.5", 63.5mm
   
THIELE & SMALL PARAMETERS   
Resonant Frequency (fs)  53Hz
DC Resistance (Re)  5.06
Coil Inductance (Le)  0.40mH
Mechanical Q (Qms)  5.76
Electromagnetic Q (Qes)  0.45
Total Q (Qts)  0.42
Compliance Equivalent Volume (Vas)  52.5 liters / 1.9 cu.ft.
Peak Diaphragm Displacement Volume (Vd)  147cc
Mechanical Compliance of Suspension (Cms)  0.30mm/N
BL Product (BL)  10.6 T-M
Diaphram Mass inc. Airload (Mms)  31 grams
Efficiency Bandwidth Product (EBP)  117
Maximum Linear Excursion (Xmax)  4.2mm
Surface Area of Cone (Sd)  350.1 cm2
Maximum Mechanical Limit (Xlim)  8.0mm
   
MOUNTING INFORMATION     
Recommended Enclosure     
Sealed 12.7-17 liters/0.45-0.6cu.ft.  
Vented 17-39.6 liters/0.6-1.4cu.ft.  
Overall Diameter  10.25",260.4mm  
Baffle Hole Diameter  9.15", 232.4mm  
Front Sealing Gasket  Fitted as standard  
Rear Sealing Gasket  Fitted as standard  
Mounting Holes Diameter  0.28", 7.1mm  
Mounting Holes B.C. D.  9.73", 247.1mm  
Depth 4.9", 123.8mm  
Net Weight  4.6 lbs., 2.1 kg  
Shipping Weight  5.7 lbs., 2.6 kg  
     
MATERIALS OF CONSTRUCTION     
Coil Construction  Aluminum voice coil  
Coil Former Polyimide former  
Magnet Composition  Neodymium magnet  
Core Details  Vented core  
Basket Materials  Die-cast aluminum basket/ heatsink  
Cone Composition  Paper Cone  
Cone Edge Composition  Cloth cone edge  
Dustcap Composition Solid composition paper dust cap

$ 124.00

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.