EMINENCE TEXAS HEAT 16 16OHM/150 WATT/12" SPEAKER VT22 AND OTHER

TEXAS HEAT

NICE WARM, FAT TONE WITH A LITTLE TOP END BITE AND CLARITY. VERY TOUCH-SENSITIVE WITH A HINT OF BRITISH FLAVOR. EMINENCE TEXAS HEAT16 OHM/150WATT/12" SPEAKER. GOOD CHOICE FOR RUNNING AS 8 OHM CABINET: VT22 OR 2X12 EXTENSION CABINETS.

SPECIFICATION   
Nominal Basket Diameter  12", 304.8mm
Nominal Impedance*  16 ohms
Power Rating   
Watts 150W
Music Program  N/A
Resonance 91Hz
Usable Frequency Range  70Hz-5kHz
Sensitivity*** 100
Magnet Weight  38 oz.
Gap Height  0.312", 7.92mm
Voice Coil Diameter 2", 50.8mm
                SOUND CLIPS
THIELE & SMALL PARAMETERS          Clean    Heavy    OD
Resonant Frequency (fs)  91Hz  
DC Resistance (Re)  14.7  
Coil Inductance (Le)  0.90mH     
      Download PDF Spec Sheet 
 
Mechanical Q (Qms)  12.48
Electromagnetic Q (Qes)  0.87
Total Q (Qts)  0.81
Compliance Equivalent Volume (Vas)  44.5 liters / 1.6 cu.ft.
Mechanical Compliance of Suspension (Cms)  0.12mm/N  
BL Product (BL)  16.0 T-M  
Diaphram Mass inc. Airload (Mms)  27 grams  
Efficiency Bandwidth Product (EBP)  104  
Maximum Linear Excursion (Xmax)  0.8mm  
Surface Area of Cone (Sd)  519.5 cm2  
Maximum Mechanical Limit (Xlim)  N/A  
     
MOUNTING INFORMATION     
Recommended Enclosure     
Sealed Acceptable  
Vented Acceptable  
Overall Diameter  12.02", 305.3mm  
Baffle Hole Diameter  10.97", 278.6mm  
Front Sealing Gasket  Fitted as standard  
Rear Sealing Gasket  Fitted as standard  
Mounting Holes Diameter  0.25", 6.4mm  
Mounting Holes B.C. D.  11.63", 295.4mm  
Depth 5.1", 130mm  
Net Weight  8.3 lbs., 3.8 kg  
Shipping Weight  10 lbs., 4.5 kg  
     
MATERIALS OF CONSTRUCTION     
Coil Construction  Copper voice coil  
Coil Former Polyimide former  
Magnet Composition  Ferrite magnet  
Core Details  Non-vented core  
Basket Materials  Pressed steel basket  
Cone Composition  Paper Cone  
Cone Edge Composition  Paper cone edge  
Dustcap Composition Zurette dust cap

$ 74.99

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.