Output Transformer OT214 for Ampeg B15N/B12N

B15OT
1 to 3$ 249.00
4+$ 235.00

Potted drop in output transformer OT214 for your Ampeg B15N and B12N.

1960-1980. Made in USA to original specs by our Friends at Heyboer.

 

Tech tip: If you ever have to replace an output transformer in a Portaflex amp with PC board: B15N, B18N,etc.., cut the old wires close to the transformer base. Splice the new wires onto the old ones and leave room under the can to tuck them away. Why? There is a shield that the wires run through under the PC board. If you pull the original wires out of there you'll never get the new in The result is you'll get ground loops, hum and noise. This tip comes from one of the original Ampeg service personnel.

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.