Shockmount for Vintage Portaflex Amps, Alternative: B15n, SB12, B18n B15S and more.

Portaflex Shockkmount Alt.

NOTE:  LIMIT OF 4 PIECES PER CUSTOMER AS OF  3/26/20 Thank you for your compliance.

Due to the rising costs of the original shock mounts we have sourced an alternative that is more readily available and lower cost.  These now feature the bottom washer that prevents "fall through" of the chassis if the shock mount rubber fails. You may still break a shock mount someday but  the amp won't fall into the cabinet anymore. Ampeg started using this on some 70's amps, neat trick, always loved how they came up with simple solutions to problems. use. They are a drop in replacement, no modification needed.

Use for all Portaflex models from 1960-1980: B12N, B15N, SB12, B12XT, B12XY, B18N and more.

Please choose bolt length from the menu below. Short: 60's amps with lipped wooden tray and amps with meta trays i.e. B15s. Long bolt: for late 60's-70's amps with flat wood tray with no lip.

Note: If you have original shockmounts that do not feature this washer it is not likely you will be able to get them apart to install a one as the nuts were locked in place.

$ 18.00

Shockmount Bolt :
Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.