Power Transformer PT108 Unpotted

1 to 3$ 165.00
4+$ 139.00

Raw, un-potted (no cover can)  PT108 power transformer for Ampeg  B15N, B12N and others.

While we do not usually recommend using your old can and dropping in a new transformer, we understand  that you might want to keep your amp as original as possible so we are now offering the PT108 raw for the do-it-yourselfer.

Made to same specs as original. Made in USA by our friends at Heyboer.

CE component certified.  Available in USA  voltage only at this time.

Note: Un-potting your old transformer is a messy an potentially toxic business. We believe most of these old transformers were potted in tar but not totally sure. You'll need an old oven and a well ventilated or outside area to do it in. It smells really bad! There are more modern potting solutions to use these days (see the internet on this) We do not provide instructions on potting and un-potting the transformers at this  time.

 Not up to it? Use our potted PT108 and save time and hassle.

If you have an aftermarket transformer with no can, the only recourse is to use the potted





Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.